Best answer:

Answer by philby
Hard to say this without stating the obvious, but you don’t have enough memory on your pc to run a virtual pc with the settings you have specified.
When you create a new VPC, you have to specify how much memory you want to devote to it. When you run VPC if there isn’t enough memory to run it AND continue running your current OS, you get that error message.
It happens to me on my old pc if I’m running a few programs, then try to fire up my Win2K3 VPC, then I have to close some apps to get it working.
When you run VPC, it tries to “reserve” an amount of memory eqaul to your specified amount when you created it, if it cannot reserve that much memory, you get the error you mentioned.
The resolutions are…
1. Get more memory
2. Free up more memory by closing apps before you run VPC
3. Reduce the amount of memory required by your virtual machine
4. Have a look at apps like “Guest PC”, “iEmulator” and “Wintel” they probbaly won’t resolve your memory issues though!

Know better? Leave your own answer in the comments!

Share and Enjoy

http://img527.imageshack.us/img527/3415/network0b.jpg

According to the Image:-

“IP Address: Unique Device (host) Address.”
What is a host?

“Default Gateway: IP Address of the Router on the Same Physical Segment”
What is a Physical Segment?

Best answer:

Answer by Tim the Tech
A host is a device that is using the IP address, like your PC or laptop.

Same Physical Segment in a nutshell means that it is in the same IP range as your host, so if your IP address is 192.168.10.100 with a subnet mask of 255.255.255.0 then in order to be in the same physical segment your router would need to have an address of 192.168.10.X.
This could get really in depth if we start explaining subnets etc., but in short form when a subnet mask is 255.255.255.0 it means that any device that wants to communicate with it must have an IP address that matches the first 3 sets of numbers. A subnet mask of 255.255.0.0 means that it only has to match the first 2 sets of numbers (in this example 192.168.X.X) and 255.0.0.0 only needs to be in the 192.X.X.X range.
Hope this helps

Add your own answer in the comments!

Share and Enjoy

I know I can install the same OS on a Virtual PC but I just want to use the Virtual PC software’s feature of being able to control to Windows at a time. So it’s something like running two user accounts at the same time instead of two OS (i.e., host and guest) at a time.

(I can’t use Virtual PC softwares because they don’t support 3d acceleration. VirtualBox does, but I can’t find the solution online to bypass the “Windows Logo Testing” problem. Most online posts I see also tell me that 3d acceleration cannot [yet] be stably emulated by virtual machines.)

Best answer:

Answer by Kevin B.
Macs do it all the time, its called an admin account. You use expose to switch between accounts but both remain constant in the RAM. so theres no loggging in and out, you just sort of switch between them, or run them both at the same time if you have 2 monitors.

as far as I know there are no PC equivalents. Macs have better hardware acceleration.

Add your own answer in the comments!

Share and Enjoy

hyphothesis: If I run XP in VirtualBox or VMware I can use the tablet there! As simple as that, how wonderful.

problem: So I run either VB or VM and no matter what I do, the XP inside doesn’t “see” the tablet. Nothing like “new hardware found” popup, nothing in hardware manager.

question: What should I do? Is it even possible to “forward” the usb into a virtual machine and use its drivers instead of the host ones?

Best answer:

Answer by PhonicUK
This is an option in VirtualBox. You have to go into the VM configuration and enable USB Host Support.

Also: It is important that when you start your VM that the tablet is *unplugged*, you must not plug it in until the VM is started and ready. You may have to use the USB menu (Bottom right of the VM display, little USB icon, right click it) to pick the device you want to use.

What do you think? Answer below!

Share and Enjoy

Best answer:

Answer by snakeeyes
Hi, I am not really sure about how Virtual PC’s Linux support is.

I would suggest u install virtual box from:

http://www.virtualbox.org

Just in case did u make the correct settings for the Linux system, Ubuntu uses Linux kernel 2.6.22 or 2.6 for short.

Good Luck!

Add your own answer in the comments!

Share and Enjoy

Best answer:

Answer by fire bLade
yes!
The sites are routed through DNS server.

Know better? Leave your own answer in the comments!

Share and Enjoy

The host I/O cache for at least one controller is disabled and the medium ‘/home/****/.VirtualBox/HardDisks/Win7.vdi’ for this VM is located on an ext4 partition. There is a known Linux kernel bug which can lead to the corruption of the virtual disk image under these conditions.

Either enable the host I/O cache permanently in the VM settings or put the disk image and the snapshot folder onto a different file system.

Best answer:

Answer by ratter_of_the_shire
“Either enable the host I/O cache permanently in the VM settings or put the disk image and the snapshot folder onto a different file system.”

I’m not sure what filesystems do work, you can check the VM forums. The I/o option is found under settings>storage.

That message isn’t and error. It’s a warning about a potential future error.

To get it going you need to attach the install DVD to the V-machine, again Settings>storage, and select or add a optical drive, and thing set it to the Win7 disk in your optical drive. Then the last thing to check is settings>system and enable booting from the CD, and place it first in the boot order. Click Okay, then start your virtual machine. It should boot up into a windows installation environment. Your left alt or crtl (i forgot wich) will unbind our mouse from the virtualized OS window. (After installation make sure to unmount the installation cd)

What do you think? Answer below!

Share and Enjoy

Thanks for your response

Best answer:

Answer by adaviel
SSL certificate moves with server name https://www.example.com, regardless of hosting or ip address

IPv4 address stays with upstream provider, usually.

Forward DNS doesn’t matter. The only way you can get a reverse lookup is from your upstream provider (who provides the IP address and connectivity)

Add your own answer in the comments!

Share and Enjoy

Best answer:

Answer by G
You should be fine with 360.
Enjoy!

Add your own answer in the comments!

Share and Enjoy

it says you can install windows xp sp3 as guest OS, was wondering if installing xp sp2 would be a problem using MS Virtual pc ….?

Best answer:

Answer by Sandy G
You can run any version of XP in a VPC guest. The only problem might be trying to use the OS that came bundled in your old system and the setup code wouldn’t work.

Do count up RAM, though.Some Vista systems come with barely enough RAM to boot, and virtual PCs do not give back assigned RAM when idle.

Add your own answer in the comments!

Share and Enjoy